EV Charger Cable Retractor for AC Charging Stations, 3.5m Cable, 3kg Pull Force, Self-Locking
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Keep the Charging Cable Up, Organized and Ready for the Next Charge
A mechanical EV charging-cable management system with a 3.5-meter retractable tether, 3kg pull-force specification and self-locking operation. Pull down the reach you need, then retract excess slack when charging is finished.
Stop Letting Heavy Charging Cable Live on the Garage Floor
More Dragging, More Coiling, More Floor Clutter
A long EV charging cable can end up across concrete, walkways or parking areas and needs to be manually looped or hung again after each charging session.
Keep Excess Cable Supported Above the Floor
Pull out only the reach you need, let the mechanism support excess cable, then retract unused slack when charging is complete.
A Simpler Routine Every Time You Plug In
Less Floor Contact
Helps keep excess charging cable raised instead of repeatedly resting or dragging across the floor.
Cleaner Charging Area
Reduces loose cable loops around a garage, driveway or shared charging space.
Pull Only What You Need
Extend the amount of tether required for the current vehicle position instead of handling all the cable.
Automatic Return
Release the lock and allow the mechanism to retract excess tether after charging.
Built Around Daily AC Charging Cable Management
Match the retractor to your actual cable weight, cable diameter and installation geometry before ordering.
Add Movement Without Leaving the Entire Cable on the Floor
The retractable tether gives the supported charging cable room to move between the storage position and the vehicle. Pull down the reach required for the way the vehicle is parked.
- Extend only the amount of tether needed
- Supports normal variation in vehicle parking position
- Helps keep excess cable raised
- Retracts unused tether after charging
Hold the Cable at a Useful Working Length
The self-locking mechanism allows the tether to remain extended instead of constantly pulling back while you position the charging connector near the vehicle.
Extend
Pull the tether toward the vehicle until you have the working length needed for the charging position.
Lock
Let the self-locking mechanism hold the selected position while the cable is being handled.
Release & Retract
Follow the release motion and guide the tether back under controlled retraction after charging.
Support the Cable Without Pulling on the Vehicle Connector
The retractor is listed with a 3kg pull-force specification. The charging cable must be light enough and routed correctly for the system to support it without creating unwanted tension at the vehicle charge port.
- Match the retractor to cable weight
- Keep the cable path as natural as possible
- Avoid constant upward pull at the connector
- Test the system before routine charging use
Choose the Mounting Direction That Fits Your Charging Space
The product currently offers Side Mount and Top Mount versions. Select the version that matches your wall, beam or overhead installation plan before checkout.
Side Mount
Designed for installation against a suitable vertical structural surface using the corresponding mounting hardware.
Top Mount
Includes the additional bracket configuration needed for a supported overhead or top-mount installation.
Match the Cable — Not Just the Charging Connector
The retractor supports the outside of the charging cable. Connector type alone does not confirm compatibility. Check cable diameter, weight and routing before ordering.
The current package shows 12mm, 15mm and 18mm rubber sleeves for matching different cable outer diameters.
The complete cable section being supported should be appropriate for the listed 3kg retraction force.
Confirm the cable can travel naturally between the mounted retractor, charger and vehicle without binding.
It is a mechanical cable-management system. Charging speed and electrical performance remain determined by your charger, charging cable, circuit and vehicle.
Help Keep the Charging Cable Away from Rough Floor Surfaces
Supporting excess cable above the ground can reduce repeated contact with concrete, dusty driveways and common walking areas.
- Less routine cable dragging
- Less loose cable across walking areas
- Cleaner garage appearance
- Easier storage after charging
Mount It Where the Cable Can Follow a Natural Path to the Vehicle
Installation height and location matter. Use a structurally suitable mounting surface and test the entire charging-cable path before normal operation.
Measure
Confirm cable diameter, approximate supported weight and intended parking position.
Select the Mount
Choose Side Mount or Top Mount and identify a structurally suitable mounting surface.
Attach the Cable Clamp
Use the sleeve that fits the charging cable securely without crushing the cable jacket.
Test the Full Motion
Confirm extension, locking and controlled return before using the setup for routine charging.
The Retractor Should Support the Cable — Not Pull on the Charge Port
Position the system so cable weight is managed without placing continuous sideways or upward tension on the vehicle connector.
Do not route the tether or charging cable through moving garage-door tracks or hardware.
Adjust the cable clamp and mounting geometry so the retractor does not continuously pull on the plugged-in connector.
Stop use if the tether, cable clamp, charging cable or mounting hardware shows damage or abnormal wear.
Cable Management Hardware — Not an EV Charger
This product manages an existing compatible AC charging cable. The charging station, vehicle and charging cable are not part of the retractor system unless specifically stated in the selected package.
- Retractor main unit
- Mounting hardware for selected version
- Cable clamp
- 12mm / 15mm / 18mm rubber sleeves
Complete the Charging Setup for Your Region
Choose charging equipment based on the connector standard, electrical system and vehicle used in your market.
Tesla NACS EV Extension Cord
Add extra AC charging reach for compatible Tesla / NACS home-charging setups.
View product →
Type 2 EV Charging Extension Cable
Add extra AC charging reach for compatible IEC 62196 Type 2 charging systems.
View product →
Gen 2 NEMA 14-50 Adapter
Connect a compatible Tesla Gen 2 Mobile Connector to a properly installed NEMA 14-50 outlet.
View product →Measure the Charging Cable Before Ordering
Send Tesstudio your charging cable outside diameter, approximate cable weight, charger type and intended mounting location if you are unsure whether the retractor fits.
Contact Tesstudio →EV Charger Cable Retractor Questions
What does the EV charging cable retractor do?
It mechanically supports and manages a compatible EV charging cable, helping keep excess cable raised instead of lying across the garage or driveway floor.
How long is the retractable tether?
The listed retractable tether length is 3.5 meters. Your total vehicle charging reach still depends on the length and routing of your existing EV charging cable.
What does 3kg pull force mean?
It describes the retraction and support-force specification of the mechanism. Your charging cable weight and mounting geometry need to be appropriate for that specification.
How does the self-locking function work?
Pull the tether to the working length needed and allow the mechanism to hold that position. Follow the supplied release motion when you want the tether to retract again.
Does the retractor fit Tesla charging cables?
Compatibility depends on cable outside diameter, supported cable weight and installation layout rather than vehicle brand alone. Measure your charging cable first.
Can it be used with J1772 or Type 2 charging cables?
The retractor does not connect electrically to the charger. A compatible cable may be supported if its outside diameter, weight and clamp fit match the retractor system.
Which cable diameters are supported by the supplied sleeves?
The current package imagery shows 12mm, 15mm and 18mm rubber cable sleeves. Confirm the outside diameter of your cable before ordering.
Does the retractor affect EV charging speed?
No charging current passes through the retractor itself. It is a mechanical cable-management accessory. Charging performance remains determined by your charger, circuit, charging cable and vehicle.
What is the difference between Side Mount and Top Mount?
Side Mount is intended for a suitable vertical mounting surface. Top Mount includes the additional bracket arrangement used for a supported overhead or top-facing installation.
Can I install the retractor outdoors?
Installation conditions should match the product's supplied instructions and the mounting environment. Keep the mechanism, hardware and cable route protected from conditions that exceed the product's listed operating requirements.
Should the retractor pull on the charging plug while the car is charging?
No. The setup should support cable weight and excess slack without continuously pulling sideways or upward on the charging connector while it is plugged into the vehicle.
Is the EV charger or vehicle charging cable included?
No. This listing is for the charging-cable retractor management system. Refer to the selected package image for the exact hardware included.
What should I check before installing it?
Confirm cable diameter, cable weight, mounting position, charging reach, garage-door clearance and the full cable path between the charger and vehicle.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
