8-Piece Carbon Fiber Pattern ABS Door Sill Protector Set for Tesla Model Y Juniper / Model Y L, Laser-Engraved with C-Pillar Covers
15%OFF
US$59+18%OFF
US$159+20%OFF
US$299+
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Protect More Than the Threshold — Cover the High-Contact Entry Area
An 8-piece molded ABS protector set for compatible Model Y Juniper and Model Y L entry areas. Carbon-fiber-pattern surfaces add a coordinated visual upgrade while placing a protective layer over frequently contacted trim.
Shoes and Bags Touch the Same Areas Every Time You Get In
Repeated Contact Gradually Leaves Visible Marks
Driver, passenger and rear-seat entry areas are repeatedly exposed to shoes, bags, clothing and everyday loading. Felt and trim surfaces can collect dirt and cosmetic wear over time.
Put a Formed Protective Surface in the Contact Zone
The molded ABS pieces cover selected high-contact entry areas so normal use reaches the replaceable protector before the covered factory surface.
Broader Coverage Than a Basic Pair of Threshold Plates
8-Piece Coverage
Multiple model-shaped pieces extend protection beyond a single narrow threshold strip.
Front + Rear Protection
Adds coordinated protection around both frequently used front and rear passenger entry areas.
Pillar Coverage
Matching pillar pieces extend the protective treatment into additional high-contact cabin-entry areas.
Integrated Styling
A dark carbon-fiber-pattern finish adds visual depth while coordinating with Tesla's black interior trim.
Protect the Felt-Covered Areas Around the Door Opening
The protector shape extends up and around selected entry surfaces rather than stopping at only the outer sill plate. This is especially useful where shoes and clothing repeatedly brush against felt-covered trim.
- Front entry-area coverage
- Rear entry-area coverage
- Matching pillar protection
- Curved molded edges for broader surface coverage
One Coordinated Set for Multiple Entry Contact Zones
Protection for the driver's frequently used entry area.
Matching protection for the front passenger entry area.
Additional coverage for passengers, children and frequent rear-seat use.
Matching molded pieces extend the coordinated protective treatment.
Protect Against the Contact That Happens a Little at a Time
Door-sill wear usually builds gradually through everyday use, not from one single event.
A Formed Protective Cover — Not a Thin Decorative Film
Molded construction gives each protector a defined three-dimensional shape around the intended entry area.
The visible surface uses a carbon-fiber-inspired pattern for a darker performance-oriented interior appearance.
Engraved detailing gives the sill pieces a more finished appearance than a plain universal protector.
Performance-Inspired Look Without Claiming Genuine Carbon Fiber
This product uses molded ABS with a carbon fiber pattern finish. It should not be confused with structural or genuine real-carbon trim.
- ABS base construction
- Carbon fiber pattern surface
- Dark interior-friendly finish
- Designed for protection and styling rather than structural use
Wipe the Protector Instead of Working Dirt Out of Exposed Felt
The molded surface gives dirt, shoe marks and everyday contact a smoother exposed area to land on than the felt surface underneath.
- Wipe routine marks with a soft damp cloth
- Remove loose grit before wiping
- Dry the surface after cleaning
- Periodically check underneath for trapped debris
Choose the Version Made for Your Tesla
Model Y Juniper and Model Y L do not use identical entry-area geometry. Choose the exact vehicle option in the product selector before installation.
Current product selector: 2025.03+
Current product selector: 2025.11+
Confirm the Position Before Final Attachment
Each molded piece has its own intended position. Test-fit the complete set before pressing any attachment area into its final location.
Confirm the Vehicle
Verify Model Y Juniper or Model Y L before unpacking and positioning all eight pieces.
Clean the Surface
Remove dust, dirt, oils and interior treatments from the intended installation areas.
Test-Fit Every Piece
Match each molded protector to the correct front, rear or pillar location before final attachment.
Check Door Operation
Confirm doors, seals, seats and surrounding trim move normally after installation.
Keep the Entry Area Clean Without Trapping Grit Underneath
Wipe shoe marks and light dirt with a soft damp towel during normal cabin cleaning.
Check periodically that all pieces remain properly aligned around their intended trim areas.
Do not allow sand or abrasive grit to remain between the protector and original trim.
Continue the Juniper / Model Y L Interior Protection Setup
Three complementary products for frequently used cabin surfaces and everyday storage.
Door Sill Protector Questions
Which Tesla models does this 8-piece set fit?
The current product selector offers Model Y Juniper 2025.03+ and Model Y L 2025.11+ versions. Select the exact vehicle option before checkout.
Is the same 8-piece set used for Model Y Juniper and Model Y L?
Do not assume the two versions are interchangeable. Entry-area and pillar geometry can differ, so choose the dedicated vehicle option shown in the selector.
How many protectors are included?
The product is sold as an 8-piece protective set. Match every piece with its intended front, rear or pillar installation position before fitting.
What material is used?
The protectors use molded ABS construction with a carbon fiber pattern surface.
Is this real carbon fiber?
No. This product is carbon-fiber-pattern ABS, not genuine structural carbon fiber.
Does the set include pillar protection?
Yes. The current 8-piece configuration includes matching pillar-area protectors in addition to the door-sill / entry-area pieces.
Does it help protect against shoe scuffs and scratches?
The molded ABS adds a physical protective layer over the covered original trim and helps reduce direct routine contact from shoes, bags and normal entry use.
Does installation require removing the seats?
The current product design is intended to fit around the corresponding entry areas without routine seat removal. Follow the supplied instructions for your selected version.
Does installation require drilling or wiring?
This is a mechanical interior protector and requires no electrical connection. The current product design does not rely on drilling through the vehicle structure.
Will the protectors interfere with seat adjustment?
When installed in the correct locations, the protectors should remain clear of normal seat movement. Always test the full seat adjustment range after installation.
Will they interfere with opening or closing the doors?
After installation, confirm that every door closes normally and that no protector interferes with door seals, latches or other moving components.
How should I prepare the surface?
Remove dust, oils, wax, moisture and loose debris first. Allow the surface to dry and test-fit all eight pieces before final attachment.
How should I clean the protectors?
Remove loose dirt first, then wipe routine shoe marks and light grime with a soft damp cloth. Do not allow abrasive grit to remain trapped underneath.
What should I do if one piece does not align correctly?
Do not force the protector into position. Recheck the Tesla version, installation location and left/right orientation before continuing.
Are the vehicle, floor mats and other accessories included?
No. The Tesla vehicle, floor mats and other accessories shown in lifestyle images are for demonstration only. This listing is for the selected 8-piece protector set.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
