Tesla Model Y Front Lower Underbody Shield, Part No. 1613579-00-A / 1613579-00-Q
Eligible products only. Cannot be combined with other offers.
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Tesla Model Y Front Lower Underbody Shield
Replacement front aero shield / lower splash panel for compatible Model Y 2020–2023 vehicles. Verify the original part number, panel shape, openings and mounting locations before ordering.
Similar Underbody Panels Can Look Correct Until You Compare the Mounts
Order by part reference and physical structure rather than by the general Model Y name alone.
Confirm the removed shield reference or approved revision.
Current page positioning is Model Y 2020–2023.
Compare width, center section and curved side areas.
Check the vent / perforated areas against the old panel.
Compare screw recesses, tabs and attachment edges.
Confirm whether clips and fasteners will be reused or replaced.
Compare the Entire Shield — Not Just One Corner
The front lower shield spans a wide section of the vehicle, with raised side sections, a broad center panel and multiple attachment locations.
- Full-width panel geometry
- Left and right raised side sections
- Center underbody surface
- Upper and lower attachment edges
- Perforated side area
Raised Side Sections Are Important Fitment Checkpoints
Compare both outer corners and the transition into the center section. These shapes determine how the shield meets nearby liner and bumper components.
- Compare left and right outer curves
- Check edge height and transition
- Inspect lower tabs
- Match adjoining-panel edges
- Confirm all fastener positions
Small Details Can Separate One Revision From Another
Compare the perforated section, molded recesses and fastener areas with your removed shield before the vehicle is disassembled further.
- Perforated / vent pattern
- Recessed fastener locations
- Side-panel contour
- Molded edge profile
- Lower attachment tabs
Don't Verify Fitment From One Corner Alone
Inspect both outer sections. A replacement panel should reproduce the required left and right shapes as well as the center attachment pattern.
- Opposite-side raised section
- Matching perforation layout
- Fastener recesses
- Outer molded edge
- Adjacent panel clearance
The Hidden Side Can Be the Best Fitment Check
Backside ribs, mounting bosses and molded attachment areas help distinguish similar-looking underbody panels.
Match the Original Panel — Not Just “Model Y”
Tesla body and underbody parts can change across production revisions, so use the current page range as a starting point and verify the physical part.
Common Reasons the Front Underbody Shield Is Replaced
The panel sits low under the front of the vehicle and can be damaged by road contact, debris or previous front-end repairs.
Road debris, steep approaches or impact can physically damage the shield.
Broken attachment areas can prevent the panel from sitting securely.
Missing fasteners or panel damage can allow the undertray to move or hang down.
The shield may need replacement after bumper, liner or collision repair work.
Confirm the Hardware Before the Vehicle Is Lifted
Missing clips or screws can prevent an otherwise correct replacement panel from being installed securely.
One shield panel unless the selected package explicitly states otherwise.
Clips, screws, fasteners, wheel liners, bumper parts, tools and installation labor unless specifically listed.
Compare Every Mount Before Final Tightening
Installation may require vehicle lifting and temporary removal or loosening of surrounding underbody and liner fasteners.
Check the replacement panel and shipping condition.
Match the new shield against the damaged original panel.
Position every tab, opening and mounting point before tightening.
Make sure the shield does not hang, rub, rattle or interfere.
Inspect It Before Installation or Modification
Check the panel while the original shipping materials are still available, particularly on long edges and molded tabs.
Questions Before Ordering 1613579
What is this product?
It is a front lower underbody shield / front aero shield / lower splash panel for compatible Tesla Model Y vehicles.
Which Model Y years does it fit?
Tesstudio currently lists this product for Model Y 2020–2023. Verify your original part reference and panel layout before ordering.
Does it fit Model Y Juniper?
Do not assume compatibility. Model Y Juniper uses a redesigned front body and underbody configuration.
Does it fit Model Y Standard or Model Y L?
Not unless compatibility is specifically confirmed for that vehicle. The current product page is positioned for the earlier Model Y.
Are 1613579-00-A and 1613579-00-Q interchangeable?
The current listing references both numbers. Verify your original panel number and physical layout, and do not assume universal interchangeability unless the replacement relationship is confirmed.
What should I compare before ordering?
Compare the complete panel shape, perforation pattern, side curves, fastener recesses, tabs, mounting edges and backside reinforcement structure.
Are screws and clips included?
Do not assume hardware is included unless the final package description specifically lists the required clips or fasteners.
What material is the shield made from?
Current images show a molded black underbody panel. Tesstudio should confirm the exact material before publishing ABS, PP or other specific material claims.
Will replacing this shield fix an underbody rattle?
Only if the shield or its mounting points are the source. Similar noises can come from loose clips, wheel liners, bumper components, adjacent panels or impact damage.
Is professional installation recommended?
Yes, particularly if vehicle lifting or surrounding underbody-panel removal is required.
What should I inspect after delivery?
Inspect both corners, mounting tabs, fastener holes, perforated areas, long edges and backside ribs before installation.
Inspect the Surrounding Area Before Ordering Additional Parts
Add other components only when inspection confirms that they also require replacement or protection.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
