Tesla Model 3 / Model Y Control Arm Bushing Set, Part No. 1044358-00-A / 1044343-00-L / 1044348-00-C
Eligible products only. Cannot be combined with other offers.
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Tesla Model 3 / Model Y Control Arm Bushing Set, Part No. 1044358-00-A / 1044343-00-L / 1044348-00-C
Tesla Model 3 / Model Y Control Arm Bushings
Three different suspension bushing types are available on this page. Select the exact option only after confirming the original bushing, control-arm position, part reference and physical dimensions.
Don't Choose by Appearance Alone
Confirm which control arm the worn bushing belongs to before comparing the shape and part reference.
Current Tesstudio reference: 1044358-00-A. Confirm the curved / compliance arm position.
Current Tesstudio reference: 1044343-00-L. Verify exact suffix and the larger straight-arm bushing position.
Current Tesstudio reference: 1044348-00-C. Confirm the smaller straight-arm bushing position.
Sleeve, Rubber, Outer Shell and Mounting Shape All Matter
Use the current multi-part photos as a comparison guide, then verify the individual selected part before pressing it into the control arm.
Compare More Than the Outside Diameter
Two suspension bushings can look similar while using a different sleeve, rubber profile or mounting orientation.
- Full part number and suffix
- Outer shell diameter
- Inner sleeve diameter
- Overall width
- Rubber molding pattern
- Mounting tabs or ears
- Required installation orientation
Position Matters During Press-Fit Installation
Bushings can use molded voids, sleeves and mounting features that must sit in the intended orientation inside the suspension arm.
- Mark the original installation direction before removal
- Compare old and new bushings side by side
- Use the correct press adapter
- Do not damage the rubber during pressing
- Follow vehicle-specific suspension service data
“Model 3 / Model Y” Is Only the Starting Point
Suspension revisions can change by production year, arm revision and vehicle generation. Verify the exact repair position before checkout.
Replace a Confirmed Worn Bushing — Not Just a Noise
Several front suspension components can create similar clunks, vibration or tire-wear symptoms.
Visible tearing, splitting or separation can justify further inspection.
Movement beyond the expected elastic range may indicate deterioration.
Clunking or creaking should be traced to the actual failed component first.
Worn bushings can contribute, but the complete suspension should be inspected.
The Selected Bushing Only
Confirm the exact quantity before scheduling the repair.
Press-Fit Bushings Require More Than a Socket Set
Correct removal, support, pressing direction and final suspension inspection are important to a safe repair.
Confirm the bushing is actually the failed component.
Remove or position the control arm according to service procedure.
Match old and new bushing before pressing.
Use correct adapters and preserve the required orientation.
Recheck suspension condition and alignment after repair.
Questions Before Ordering a Control Arm Bushing
What is included with this product?
This listing is for the selected control-arm bushing only, not a complete suspension arm.
Which bushing options are currently listed?
Curved Control Arm Bushing 1044358-00-A, Large Straight Control Arm Bushing 1044343-00-L, and Small Straight Control Arm Bushing 1044348-00-C.
Is 1044343-00-L definitely the correct OE suffix?
Tesstudio currently lists 1044343-00-L. Because other suspension catalogs commonly reference different 1044343-series suffixes, confirm the supplier label and original part before ordering.
Does 1044358 fit both left and right sides?
The bushing itself is commonly listed for the corresponding curved control arms on both sides, but the complete control arms use separate left and right references. Confirm your installed arm.
Does this fit every Model 3 and Model Y?
No universal compatibility should be assumed. Verify VIN, production configuration, control-arm position, part number and bushing dimensions.
Does it fit Model 3 Highland or Model Y Juniper?
Do not assume later suspension revisions use the same bushing. Confirm the arm reference installed on your vehicle before purchase.
Can I replace only the bushing?
Yes, when inspection confirms the control arm itself and other associated components remain serviceable.
Does installation require a press?
Many suspension bushings require a suitable hydraulic press or bushing press with the correct adapters. Professional installation is recommended.
Will this fix every suspension clunk?
No. Noise can also come from ball joints, links, wheel bearings, dampers, springs, tires, wheels, brakes, subframe mounts or fasteners.
Should alignment be checked after installation?
Yes. An alignment check is recommended after control-arm or suspension-bushing service.
Buy the Complete Arm Only When the Inspection Requires It
These are separate suspension components and are not automatic substitutes or required add-ons to the selected bushing.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
