Tesla Model 3 / Model Y Buzzer, Old Version, Part No. 1299965-00-A

Key Information

• Product Type: Pedestrian warning speaker / PWS buzzer / AVAS alert speaker replacement.
• Part Number: 1299965-00-A.
• Version: Old version replacement, based on the current product title.
• Current Image Fitment: Model 3 2017–2023 and Model Y 2019–2024.
• Function: Helps restore the external low-speed pedestrian alert sound after proper diagnosis.
• Install Area: Vehicle exterior fascia area, depending on model year and configuration.
• Service Recommended: Professional installation or qualified Tesla service experience is recommended.

Verify Fitment Before Ordering

The current product image lists Model 3 2017–2023 and Model Y 2019–2024 for part number 1299965-00-A. Before checkout, compare the removed speaker with the product photos and confirm that your vehicle uses this old-version speaker.

Helps Restore Low-Speed Pedestrian Alert Sound

The pedestrian warning speaker is used for the external warning sound that helps pedestrians notice the vehicle at low speeds and in reverse. When the speaker is failed, disconnected or damaged, the vehicle may lose this important external alert function.

• Low-Speed Alert: Supports the external alert sound used at low vehicle speeds.
• Reverse Alert: Supports pedestrian awareness when the vehicle is backing up.
• Repair Use: Useful after diagnosis confirms the PWS speaker is damaged, failed or disconnected.
• Warning Message Support: May help resolve PWS-related warnings only when the speaker is the confirmed cause.

Built For Exterior Front-End Exposure

A pedestrian warning speaker sits in an exterior area where it may face moisture, road dust, temperature changes and vibration. The current image highlights sealing and resistance to moisture and light rain, which is useful, but the page should avoid unsupported “fully waterproof” claims.

• Sealed Housing Design: Helps protect the speaker in normal exterior use.
• Moisture Resistance: Useful for road splash and light rain exposure.
• Black Molded Body: Matches the hidden exterior mounting area.
• Connector Check: Connector must be clean, dry and fully seated after installation.

Connector, Mounting Ears And Housing Shape Matter

Repair-part customers need to compare the replacement part with the original part before ordering. The detail image should be used to highlight the connector area, mounting ears, screw holes and rear housing shape.

• Connector Area: Compare the plug shape and harness position with your original speaker.
• Mounting Ears: Check the screw-hole locations and bracket shape.
• Speaker Grille: Compare the front grille and housing diameter.
• Rear Housing: Compare the rear case shape and molded structure before installation.

Package Contents Must Be Clear

The current package image shows one pedestrian warning speaker. The page should make this clear above the Add to Cart button so customers do not expect screws, clips, wiring harnesses or software service to be included.

• Included: 1 pedestrian warning speaker / PWS buzzer.
• Not Included By Default: Screws, clips, harnesses, brackets, fascia parts, service coding or installation labor.
• Hardware Check: Confirm whether your old screws and clips are reusable before installation.
• Service Check: Some vehicles may require software/configuration diagnosis after speaker replacement.

Installation & Service Notes

Pedestrian warning speaker replacement should be treated as an exterior electrical repair. Access can vary by vehicle model and production year, and may require fascia, liner or trim access depending on the exact service procedure.

• Step 1: Diagnose the issue before replacing the speaker.
• Step 2: Confirm the removed part number is 1299965-00-A or a compatible replacement revision.
• Step 3: Compare connector, mounting ears, screw holes and speaker housing shape.
• Step 4: Safely access the original speaker according to the correct service procedure.
• Step 5: Disconnect the electrical connector carefully and avoid pulling the harness.
• Step 6: Install the replacement speaker securely and confirm the connector is fully seated.
• Step 7: Test the low-speed pedestrian warning sound and check for related alerts after reassembly.

Position This Page As A Safety Repair Part Page

Customers buying this product are usually trying to restore a failed external warning sound, repair an AVAS / PWS issue, replace a damaged speaker after front-end work, or match an old part number. The page should be direct, technical and fitment-focused.

• Lead With Part Number: Put 1299965-00-A in the title, main image and purchase area.
• Use Accurate Naming: Pedestrian Warning Speaker / PWS Speaker / AVAS Speaker is clearer than only “Buzzer.”
• Show Fitment Clearly: Current image lists Model 3 2017–2023 and Model Y 2019–2024.
• Show Connector Detail: Move the connector close-up image higher on the page.
• Avoid Overpromising: Do not promise to clear every dashboard warning or repair every sound fault.
• Remove Generic Q&A: Replace general accessory Q&A with PWS-specific FAQ.

Compatibility Reminder Before Checkout

This product should be purchased only after confirming that 1299965-00-A matches the original pedestrian warning speaker or confirmed replacement part for the vehicle.

• Current Product Title: Tesla Model 3 / Model Y Buzzer, Old Version, Part No. 1299965-00-A.
• Recommended Product Naming: Tesla Model 3/Y Pedestrian Warning Speaker, Part No. 1299965-00-A.
• Current Image Fitment: Model 3 2017–2023 and Model Y 2019–2024.
• Product Type: PWS / AVAS external pedestrian warning speaker.
• Not Universal: Do not order for Model 3 Highland, Model Y Juniper, Model Y L, Model S, Model X or Cybertruck unless fitment is confirmed separately.
• Professional Service: Recommended if the vehicle has PWS warnings, wiring faults, connector damage or software/configuration issues.

Why Replace A Failed Pedestrian Warning Speaker?

Recommended Page Content Order

• First Screen: Pedestrian Warning Speaker For Tesla Model 3/Y + 1299965-00-A + fitment years.
• Second Screen: Clean white-background product image with part number and old-version callout.
• Third Screen: Fitment image: Model 3 2017–2023 / Model Y 2019–2024.
• Fourth Screen: Connector, mounting ears and screw-hole close-ups.
• Fifth Screen: Function explanation: low-speed alert, reverse warning, PWS diagnosis reminder.
• Final Screen: Installation notes, package contents, safety warning and product-specific FAQ.