Tesla Model 3 Front Bumper Cover, Part No. 1084168-00-B / 1084168-SO-E

Key Information

• Product Type: Front bumper cover / front fascia outer shell.
• Part Numbers: 1084168-00-B / 1084168-SO-E.
• Vehicle Application: Tesla Model 3, depending on production year, trim, front fascia configuration and original part number.
• Repair Use: For front bumper cover replacement after damage, cracks, scuffs, broken tabs, collision repair or body repair.
• Surface Finish: Product images show a black bumper cover. Confirm whether it is unpainted, primer black or finished black before checkout.
• Professional Installation Recommended: Front fascia replacement may require bumper removal, harness disconnection, grille transfer, sensor checks and fitment adjustment.
• Fitment Check Required: Compare your old bumper cover, openings, tabs, mounting points and part number before ordering.

When A Front Bumper Cover May Need Replacement

A front bumper cover is often replaced after parking damage, front-end impact, cracked fascia, deep scratches, broken mounting tabs or collision repair. Because the front fascia affects exterior fitment and may hold multiple trim and electrical components, the page should be written like a body repair part page, not a normal accessory page.

• Cracked Or Damaged Fascia: Replace when the original bumper cover is cracked, torn or deformed.
• Broken Tabs: Damaged tabs can make the bumper sit loose or create uneven panel gaps.
• Collision Repair: Useful for body shops restoring the front-end exterior after impact.
• Paint Restoration: Suitable when repainting and refinishing a replacement bumper cover is more practical than repairing the old one.
• Front-End Rebuild: Compare related brackets, grille pieces, sensors and hardware before final repair.

Verify Openings, Tabs And Old Part Number Before Ordering

Front bumper covers can vary by production year, market, trim and equipment. Before checkout, customers should compare the original bumper cover with the product photos and confirm the correct part number.

Backside Structure Matters For Installation

The backside photo is important because it shows the inner mounting structure, openings and support areas. For body repair buyers, this image should be placed near the top so they can compare tabs and attachment points before ordering.

• Inner Mounting Points: Helps compare the hidden attachment layout with the original bumper cover.
• Lower Edge Structure: Check lower tabs and holes before transferring underbody or valance parts.
• Side Corner Shape: Compare both bumper corners to avoid mismatch during installation.
• Accessory Transfer: Some trim, grille, harness or sensor parts may need to be transferred from the old bumper.

Position This As A Body Repair Part, Not A Small Accessory

Customers buying a front bumper cover are usually collision repair buyers, body shops, used Tesla owners or owners repairing front-end damage. The page should focus on accurate fitment, real product photos, paint prep, shipping protection and installation requirements.

• Lead With Part Numbers: Put 1084168-00-B / 1084168-SO-E in the product title, main image and purchase area.
• Clarify Paint Status: State clearly whether the bumper is unpainted, primer black or already painted.
• Show Front And Back: Keep full exterior, side angle, backside and tab close-up images.
• Add Package Contents: Tell customers whether grille, brackets, clips or sensors are included.
• Add Shipping Note: This is an oversized body part and needs reinforced packaging inspection on arrival.
• Remove Generic Q&A: Replace “easy DIY accessory” language with body repair-specific FAQ.

Installation & Body Shop Notes

Front fascia replacement may require removing the original bumper cover, disconnecting front fascia connectors, transferring grille or trim parts, checking washer hose or lighting components where equipped, aligning panel gaps and refinishing the part before installation.

• Step 1: Confirm model year, part number, opening layout and old bumper cover shape.
• Step 2: Inspect the new bumper cover immediately after delivery before painting or installation.
• Step 3: Test-fit the bumper cover before paint whenever possible.
• Step 4: Transfer required grille, brackets, clips, sensors, lights or harnesses from the old bumper if not included.
• Step 5: Paint and refinish the bumper cover to match the vehicle if it is not supplied as a color-matched painted part.
• Step 6: Install carefully and check hood gap, fender gap, headlight edge, lower valance and wheel liner fitment.
• Step 7: Test lights, sensors, camera, washer hose and warning systems after reassembly where applicable.

Paint, Prep And Finish Must Be Clear

The product images show a black bumper cover, but the product page should not allow customers to assume it is already painted to match their Tesla. For body repair parts, paint status is one of the most important pre-purchase questions.

• If Unpainted: Say “Unpainted / primer black — paint required before installation.”
• If Primer Black: Say “Primer black finish for body shop paint prep.”
• If Painted: List exact color code, finish, paint process and color-match limitations.
• If Oversized Shipping: Tell customers to inspect for shipping damage before signing or before paint work.

Oversized Body Part Shipping Reminder

A full front bumper cover is a large, flexible exterior body part. Customers should inspect the package and part before paint or installation.

• Inspect On Arrival: Check corners, tabs, lower edge and surface before modification.
• Keep Packaging: Keep the carton, foam and packing material if there is shipping damage.
• Photo Documentation: Take photos before installation or paint if there is any issue.
• Do Not Paint Damaged Parts: Resolve shipping or fitment concerns before refinishing.

Compatibility Reminder Before Checkout

This product should be purchased only after confirming that 1084168-00-B / 1084168-SO-E matches the customer’s original front bumper cover or confirmed replacement part.

• Current Product Title: Tesla Model 3 Front Bumper Cover, Part No. 1084168-00-B / 1084168-SO-E.
• Product Type: Front bumper cover / front fascia outer shell.
• Recommended Fitment Display: Tesla Model 3 production range should be clearly listed on the page.
• Not Universal: Do not order for Model 3 Highland, Model Y, Model Y Juniper, Model Y L, Model S, Model X or Cybertruck unless fitment is confirmed separately.
• Sensor / Trim Check: Confirm openings and transferable parts before checkout.
• Body Shop Installation: Recommended for paint, test fit, alignment and final assembly.

Why Replace A Damaged Front Bumper Cover?

Recommended Page Content Order

• First Screen: Front Bumper Cover For Tesla Model 3 + 1084168-00-B / 1084168-SO-E + paint status.
• Second Screen: Full front image and angled side image showing exterior shape.
• Third Screen: Backside image showing mounting tabs and inner structure.
• Fourth Screen: Opening and tab verification checklist.
• Fifth Screen: Paint, prep, oversized shipping and body shop installation notes.
• Final Screen: Compatibility reminder, package contents and product-specific FAQ.