Starlink Mini Flexible Suction Mount for SUVs, Vans & RVs
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
A Removable Starlink Mini Mount for Glass, RVs, Vans and Cars
Mount Starlink Mini without adding permanent roof hardware. Choose a compact single-support configuration or a wider double-support setup for compatible smooth, clean and non-porous mounting surfaces.
Deploy Starlink Mini Without Committing to a Permanent Mount
Drilling and Fixed Roof Hardware Are Not Right for Every Trip
Rental vehicles, family cars, temporary RV setups and occasional road trips may not justify a permanently installed roof bracket or additional holes in the vehicle.
Set Up Starlink Mini When You Need It, Then Remove the Mount
Lever-lock suction cups create a temporary mounting option on compatible smooth surfaces so the Starlink Mini can be deployed without permanent vehicle modification.
Simple Hardware for Faster Starlink Mini Deployment
No Drilling
Uses removable suction hardware instead of requiring holes through the vehicle roof or interior trim.
Multiple Positions
Suitable for compatible windshield, sunroof, rear-glass and other smooth mounting locations.
Quick Removal
Release the suction-cup locks when the Starlink Mini setup needs to be moved or packed away.
Two Mount Styles
Choose the compact single-support setup or the broader double-support configuration.
Spread the Mount Across Four Suction Points
The Double Suction Mount uses four separate locking suction points around the Starlink Mini to create a broader support footprint on a suitable flat glass surface.
- Four independent suction points
- Two support rails
- Starlink Mini held between the support brackets
- Removable without permanent glass modification
Suction Performance Starts With the Mounting Surface
Clean flat glass generally provides the most predictable surface for suction-cup mounting.
Use only where the mount and Starlink Mini do not interfere with the driver's required field of view.
Confirm the glass is flat enough, clean and able to provide full suction-cup contact.
Some non-porous surfaces may work when they are sufficiently smooth, flat, clean and undamaged.
Do not assume every dashboard surface is suitable. Grain, stitching, curvature, coatings, dust and soft-touch materials can prevent a complete vacuum seal.
Built Around the Starlink Mini Form Factor
Current product media identifies Starlink Mini as the compatible antenna. Do not order this mount for other Starlink dish designs based only on visual similarity.
Configure the Double Mount Around the Available Glass Area
Current product media shows the double-support configuration positioned across both the long and short sides of the Starlink Mini, giving more flexibility when the available glass area has different proportions.
- Long-side mounting configuration
- Short-side mounting configuration
- Four-point suction layout
- Check cable direction before locking the final position
One Removable Mount for Different Mobile Setups
Useful when a permanent exterior Starlink bracket is not part of the RV setup.
Deploy Starlink Mini on suitable glass and remove the mount when the workspace is packed down.
Add a temporary Mini mounting option without adding fixed roof hardware.
A removable option for temporary trips, camping and mobile work setups.
Keep Starlink Mini Inside the Cabin When the Surface Allows It
Interior glass mounting can help keep the Starlink Mini away from direct exterior weather while still creating a temporary travel setup.
- Windshield or sunroof glass options
- Less exposure than exterior mounting
- Easy access to the power cable
- Remove or reposition if driver visibility is affected
Add the 10FT Power Cable Only When Your Setup Needs It
The current selector includes mount-only versions and versions bundled with a 10FT vehicle power cable. Confirm your power requirements before choosing a bundle.
Choose this when you already have a compatible Starlink Mini power solution and only need the mounting hardware.
Adds the vehicle power cable shown in the selected bundle for a more complete mobile Starlink Mini setup.
For Starlink Mini — Not Every Starlink Dish
The support dimensions and clamp layout are designed around Starlink Mini. Current product media specifically excludes several larger Starlink dish configurations.
Starlink Mini with the body profile shown in the current product images.
Do not use this product as a replacement mount for the larger Gen 3 / Rev 4 Standard dish.
Standard Actuated and High Performance units use different dimensions and mounting requirements.
Assemble. Clean. Press. Lock. Check.
Suction performance depends heavily on installation quality. Every suction cup should have full contact with the mounting surface before the Starlink Mini is relied on.
Assemble the Brackets
Fit the selected support configuration around the Starlink Mini before mounting it to the vehicle.
Clean the Surface
Remove dust, oil, wax and moisture from the glass and suction-cup contact surfaces.
Press Into Position
Place every suction cup completely on a flat area without crossing trim, seams or curved edges.
Lock & Inspect
Engage each locking lever, then pull-test the mount gently before connecting power or moving the vehicle.
Check Suction and Visibility Every Time Before the Vehicle Moves
Suction strength can change with temperature, vibration, contamination, surface finish and time. A temporary suction mount should be inspected regularly rather than treated as permanent hardware.
Do not place the Starlink Mini where it blocks the windshield, mirrors, cameras, airbags or vehicle controls.
Stop using the mount immediately if any cup lifts, loses vacuum or begins moving on the surface.
Vehicle window-mounted equipment and in-motion Starlink use can be subject to local regulations and service-plan requirements.
Clean Suction Surfaces Before Reinstalling
Unlock the lever before lifting the edge of the suction cup from the surface.
Dirt and grit can reduce suction performance and may mark delicate surfaces.
Allow cleaned suction components to dry before reinstalling the mount.
Check cups, levers, brackets and fasteners for wear before each trip.
Complete the Starlink Mini Vehicle Setup
Three complementary power products for RV, vehicle and off-grid Starlink Mini use.
Starlink Mini Suction Mount Questions
Which Starlink model does this mount fit?
This mount is designed around Starlink Mini. Current compatibility media does not list Gen 3 Kickstand, Standard Actuated or High Performance Starlink dishes as compatible.
What is the difference between Single and Double Suction Mount?
The Single Suction Mount uses one support rail with two suction cups. The Double Suction Mount uses two support rails with four suction cups for a broader mounting footprint.
Does installation require drilling?
No. The mount uses removable suction-cup hardware and does not require drilling into the vehicle for the suction installation shown.
What surfaces work best?
Clean, smooth, flat and non-porous surfaces provide the best conditions for suction. Glass is generally more suitable than textured, porous or strongly curved surfaces.
Can I install it on a textured dashboard?
Do not assume a textured dashboard will hold suction. Grain, stitching, soft-touch coatings and curvature can prevent the suction cup from forming a complete seal.
Can I mount it on the windshield?
A suitable smooth windshield area can provide a suction surface, but the Starlink Mini and mount must not obstruct required driver visibility, airbags, mirrors, cameras or local legal sight lines.
Can it be mounted on a panoramic sunroof?
Current product imagery shows sunroof-glass mounting. The glass must be clean, smooth and large enough for every suction cup to sit fully on one flat surface. Inspect overhead mounts frequently because a released mount could fall into the cabin.
Can the Double Suction Mount be positioned in different directions?
Current product media shows the four-cup configuration positioned along both the long and short sides of the Starlink Mini. Confirm cable routing and available glass area before selecting the final orientation.
Is the mount guaranteed to stay attached while driving?
Suction performance varies with surface condition, temperature, vibration, installation quality and time. Inspect and pull-test every suction point before vehicle movement and stop using the mount if any cup begins to release.
Can I use Starlink Mini while the vehicle is moving?
Starlink in-motion service availability can depend on your service plan, region and current Starlink terms. Vehicle-mounted equipment must also comply with local laws and must not interfere with safe vehicle operation.
Can I mount the Starlink Mini outside the vehicle while driving?
Exterior vehicle mounting introduces additional wind, weather and vibration loads. Do not treat a removable suction mount as equivalent to a permanently engineered high-speed exterior mounting system. Use only in applications appropriate for the mount and inspect it frequently.
Is the 10FT vehicle power cable included?
Only the bundle options that specifically state “+ 10FT Vehicle Power Cable” include that cable. Mount-only variants do not include the optional power cable.
Does the mount supply power to Starlink Mini?
No. The mounting hardware itself is mechanical. Starlink Mini still requires a compatible power source and power cable. A 10FT vehicle power cable is available only in the corresponding bundle options.
How should I prepare the suction cups before installation?
Clean the mounting surface and the suction contact area, remove dust, oil and moisture, and allow everything to dry before pressing and locking the cups.
Can the suction mount be reused?
The mount is designed to be removable and reusable. Clean the suction surfaces between installations and inspect them for damage, deformation or contamination before reinstalling.
Will the suction cups leave marks?
Surface reactions can vary by material and coating. Test delicate surfaces first, keep the cups and surface clean, and avoid placing suction hardware on damaged films, loose coatings or surfaces that may be sensitive to pressure.
Is Starlink Mini included?
No. Starlink Mini, the vehicle and other lifestyle equipment shown in product imagery are for demonstration only. The included components depend on the selected mount and power-cable bundle.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
