Starlink Mini No-Drill DC Cable Pass-Through Panel
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Create a Clean Exterior DC Power Connection for Starlink Mini
Route compatible Starlink Mini DC power through an RV, camper, trailer, boat or battery-box panel without leaving a loose cable permanently hanging through a door or window. The aluminum bulkhead connector creates one dedicated exterior power point.
Stop Running the Starlink Mini Power Cable Through Temporary Gaps
Doors, Windows and Storage Hatches Become the Cable Entry Point
Temporary Starlink setups often require a power cable to run between the outside Mini and an indoor battery, vehicle electrical system or power converter. That can leave loose cable exposed every time the system is deployed.
Put the DC Connection in One Permanent, Easy-to-Reach Location
The panel-mounted connector creates a clean exterior connection point while the internal power wiring can remain routed inside the RV, trailer, boat or enclosure.
A Small Panel That Makes the Whole Starlink Setup Cleaner
Dedicated DC Port
Creates a fixed 5.5 × 2.1mm DC connection between exterior and interior power wiring.
Sealed Protective Cap
Close the exterior socket when Starlink Mini is packed away and the power connection is not in use.
Aluminum Construction
Metal plate and connector body provide a more substantial panel interface than a loose plastic cable gland.
Compact Footprint
The approximately 2.36-inch square plate keeps the exterior connection small and visually organized.
Plug In Outside. Keep the Main Power System Inside.
Once mounted through a suitable panel, the exterior socket becomes the connection point for the Starlink Mini cable while the 12-inch internal lead connects to the compatible indoor DC power setup.
- Exterior female DC connection
- Interior 12-inch male DC lead
- Cleaner separation between indoor and outdoor wiring
- Useful for permanent RV and enclosure cable routing
Compact Dimensions for RV, Boat and Equipment Panels
Measure the supplied component and inspect both sides of the installation area before making a permanent opening.
Keep the Exterior Port Better Protected Between Starlink Sessions
Current product media identifies the panel assembly with an IP67 water- and dust-resistance rating.
The tethered cap closes over the exterior connection when a DC cable is not attached.
Multiple sealing elements sit around the panel and connector body as part of the installed assembly.
The panel rating alone cannot waterproof an incorrectly cut, uneven or poorly sealed wall opening. The mounting gasket, O-ring, fasteners and connector cap must be installed correctly, and the surrounding RV or enclosure panel must also be suitable.
The Connector, Plate and Sealing Hardware Work as One System
Exterior 5521 female socket forms the main DC connection point.
Square mounting plate supports the connector and distributes the fastening points.
Sits between the panel and mounting surface to help seal the installation perimeter.
O-ring and retaining nut secure and seal the bulkhead connector from the rear.
Built as a Panel-Mount Component, Not a Loose Plastic Adapter
Current product imagery identifies the connector as a one-piece CNC-machined aluminum component with an anodized surface finish.
- One-piece aluminum connector body
- Anodized exterior finish
- Threaded bulkhead-style construction
- Designed for repeated plug / unplug use
Connect to an Existing Compatible DC System or Build a Dedicated Battery Circuit
Use the panel between compatible 5.5 × 2.1mm DC cabling so the interior power connection can remain installed while Starlink Mini is disconnected outside.
Integrate the rear lead into a correctly designed and protected battery or DC power system using appropriate voltage regulation, polarity and circuit protection.
The Panel Routes Power — It Does Not Convert or Regulate It
Treat this product as a physical DC connection point. The power source, voltage converter, battery system and cabling must already be appropriate for the Starlink Mini installation.
The panel does not boost, reduce or stabilize the voltage supplied through the connector.
Verify the polarity of every DC cable and custom battery connection before applying power.
DIY battery wiring should include suitable over-current protection and correctly sized conductors.
Use One Clean DC Entry Point Across Different Starlink Mini Setups
Create a dedicated exterior power connection while keeping batteries and converters inside.
Route Starlink Mini power through a suitable utility or exterior equipment panel.
Useful for protected compatible marine DC installations with appropriate corrosion control.
Add a clean external DC connector to a suitable portable or fixed battery enclosure.
Check Both Sides of the Wall Before Making the Opening
This is a bulkhead-style panel connector. Installation requires a suitable opening and fastening points, so inspect the structure and wiring behind the panel first.
Choose the Location
Select a flat panel with enough rear clearance for the connector body and internal cable.
Check Behind the Panel
Confirm there is no hidden wiring, plumbing, framing or moving equipment behind the location.
Cut, Fit & Seal
Measure the actual supplied connector, prepare the opening and position the gasket correctly.
Secure & Test
Tighten the retaining hardware and screws, then verify polarity and DC operation before connecting Mini.
Close the Cap When Starlink Mini Is Packed Away
When the exterior cable is disconnected, the tethered protective cap closes over the female DC socket so the wall panel remains compact and tidy.
- Integrated tethered cap
- Square low-profile faceplate
- Four recessed fastening locations
- Black anodized utility finish
Starlink Mini DC Pass-Through Panel Questions
What is this Starlink Mini panel used for?
It creates a fixed DC power pass-through point through an RV, camper, trailer, boat, battery box or similar panel. It allows compatible exterior and interior power cabling to connect without routing one continuous loose cable through a door or window.
What connector size does the panel use?
Current product media identifies the connection as 5521, commonly written as 5.5 × 2.1mm DC barrel format. Confirm your existing cable dimensions before installation.
Does this panel convert voltage?
No. It is a passive DC pass-through connector. It does not boost, reduce, regulate or convert the voltage supplied by the connected power source.
Can I connect it directly to a battery?
It can form part of a correctly designed battery-powered Starlink Mini system, but the battery voltage, polarity, wiring gauge, fuse protection and any required voltage converter must all be appropriate for the installation.
Is the panel IP67 waterproof?
Current product media lists the panel as IP67. Final installation weather resistance depends on the mounting gasket, O-ring, connector cap, panel opening, fastener installation and condition of the complete assembly.
Is it waterproof while the cable is connected?
Current product imagery promotes weather resistance both while connected and while the cap is closed. The cable plug must be fully seated and compatible, and the complete installation must remain properly sealed.
Does the cap protect the port when it is not being used?
Yes. The exterior female connector has a tethered protective cap that closes over the port when the Starlink Mini power cable is disconnected.
What material is the panel made from?
Current product media identifies the plate and main female connector body as aluminum, with an anodized exterior finish and stainless mounting screws.
How large is the front mounting plate?
Current measurement imagery shows an approximately 2.36 × 2.36 inch square front plate.
How long is the rear cable?
Current product imagery lists the integrated rear DC lead at approximately 12 inches.
Does installation really require no drilling?
This is a bulkhead-style panel connector and requires a suitable panel opening and fastening points unless your installation already has a compatible prepared opening. Measure the actual supplied product before making permanent cuts.
Can I install it on an RV exterior wall?
Yes, provided the selected wall or utility panel has sufficient structural support and rear clearance. Check for hidden wiring, plumbing and framing before cutting.
Can it be installed on a boat?
It can be used in an appropriate marine installation, but the complete wiring system should be protected against moisture and corrosion and should follow applicable marine electrical practices.
Can I install it on a portable battery box?
Yes, a suitable battery-box panel can provide a convenient mounting location when there is enough internal clearance and the electrical system is correctly protected.
Does the panel itself provide power?
No. The panel stores no energy and contains no power supply. A compatible battery, DC converter, vehicle power system or other suitable source must be connected separately.
Can it be used with a 12V or 24V power system?
The panel itself is a passive connection point. Whether a 12V or 24V system is suitable depends on the Starlink Mini power architecture, connected cable, converter and complete electrical installation.
Can I use a 30V Starlink Mini power converter behind the panel?
Yes, when the converter, cable connector, polarity and complete electrical setup are mutually compatible. The pass-through panel simply carries the supplied DC connection.
What should I check before cutting the wall?
Measure the actual supplied connector, check the panel thickness and rear clearance, and verify there is no hidden wiring, plumbing, framing or structural hardware behind the proposed installation location.
What comes with the panel?
Current product imagery shows the aluminum female connector, square faceplate, protective cap, mounting gasket, silicone O-ring, aluminum retaining nut, integrated 12-inch male lead and four mounting screws.
Is Starlink Mini included?
No. Starlink Mini, batteries, RVs, boats, power converters and other equipment shown in product imagery are for demonstration only. This listing is for the DC pass-through panel assembly.
Is this an official Starlink product?
No. This is an aftermarket accessory designed for compatible Starlink Mini DC power installations and is not manufactured or endorsed by Starlink.
Build the Starlink Mini Power System Around Your Installation
Three complementary Tesstudio products for regulated DC power, portable battery power and backup AC power.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
