Pair of Front Fender Cameras for Tesla Model 3 / Model Y (Part No. 1495864 / 1495865)
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Replace the Side Repeater Camera, Not Your Confidence
A left-and-right side repeater camera pair for compatible Tesla Model 3 and Model Y applications. Built for owners replacing a damaged, failed, or aging front-fender camera assembly.
When the Side Camera Stops Doing Its Job
Side repeater cameras live in an exposed area of the front fender. Damage, moisture, age, or electrical faults can leave an owner looking for the correct replacement rather than another cosmetic accessory. This page is built around the information that matters most: side, part number, physical fit and installation.
Replace a Failed Assembly
A practical replacement path when the existing side repeater camera assembly is damaged or no longer operating as expected.
Keep the Factory Location
Designed around the original front-fender mounting position and the assembly shape shown in the product images.
Match Before Installing
Compare your existing part number, connectors and exterior trim before placing the order.
Left and Right, Clearly Identified
Do not rely only on the vehicle name. Use the number on the existing camera assembly as an additional fitment check before ordering.
Left-hand side repeater camera assembly reference.
Right-hand side repeater camera assembly reference.
Compare the Assembly Before You Order
Replacement parts should be matched visually as well as by vehicle selection. Compare the camera housing, mounting points, connector arrangement and exterior trim against the part currently installed on your Tesla.
- Camera lens integrated into the side repeater assembly
- Front and rear construction visible for easier comparison
- Factory-position mounting layout
- Model 3 and Model Y options available on the product selector
Three Things to Match
Fitment can vary by vehicle configuration and production period. Confirm these details before installing the replacement.
Select the Model 3 or Model Y option that matches your vehicle.
Check the number marked on the camera you are replacing and compare it with 1495864 / 1495865.
Compare the connector layout, mounting points and exterior trim with the product photos before ordering.
Production changes can affect replacement-part compatibility. Confirm the original camera part number before purchase or contact Tesstudio with your model and production year for fitment help.
Made to Sit Where the Original Camera Belongs
The camera remains integrated into the familiar front-fender side repeater shape, helping the replacement maintain the clean exterior profile Tesla owners expect.
- Low-profile triangular housing
- Integrated camera opening
- Dark exterior finish
- Clean original-location appearance
Replace, Connect, Secure
Side repeater replacement involves accessing the front-fender area, disconnecting the existing camera assembly and fitting the correct replacement. Use qualified installation help if you are not comfortable working around exterior trim and camera components.
Remove
Carefully access and remove the existing side repeater camera assembly without damaging the surrounding fender or mounting tabs.
Connect
Compare the connectors first, then connect the replacement assembly only after confirming the correct side and fitment.
Secure
Seat the replacement correctly in the factory position and confirm that the mounting points are fully engaged.
Replacing or moving a side repeater camera can require camera calibration to be cleared and completed again. Follow the applicable Tesla service procedure for your vehicle before relying on driver-assistance features.
The Back of the Part Matters Too
When confirming a replacement camera, do not compare only the visible exterior face. Use this rear view to check mounting geometry and connector layout against the original part removed from your vehicle.
- Compare connector positions
- Compare housing geometry
- Check mounting tabs before installation
- Do not force a mismatched assembly into position
A Left + Right Camera Pair
The product is presented as a pair of front-fender side repeater camera assemblies. Confirm the selected Tesla model before checkout.
Continue Your Model 3 / Model Y Setup
Three related Tesstudio upgrades for owners working around visibility, side-camera styling and everyday exterior use. Check each product page for its exact vehicle fitment before ordering.
Real Carbon Fiber Side Camera Cover
Add a genuine carbon-fiber exterior finish around compatible Model 3 and Model Y side-camera locations.
View product →
Side Mirror Blind Spot Monitor
Add a mirror-area visual warning system on compatible Tesla configurations.
View product →
Dynamic Door Projection Lights
Add a cleaner nighttime entry detail to compatible Model 3 and Model Y configurations.
View product →Check Before You Order
Send Tesstudio your Tesla model, production year and a photo of the original camera part number. Confirming first is easier than correcting a mismatch later.
Contact Tesstudio →Questions Before You Replace the Camera
What are part numbers 1495864 and 1495865?
They identify the left- and right-side repeater camera assemblies associated with this replacement pair. 1495864 corresponds to the left side and 1495865 to the right side. Always compare the full marking on your original assembly before ordering.
Does the package include both the left and right cameras?
This listing is presented as a pair of side repeater camera assemblies. Confirm the product option and package information shown above before checkout.
How do I know whether this fits my Tesla?
Start with the Model 3 or Model Y selector, then compare your original camera part number, connector layout, mounting points and exterior trim with the product images. Contact Tesstudio before ordering if any detail is different.
Will it fit every Tesla Model Y?
Do not assume fitment based on the Model Y name alone. Production changes can affect replacement parts. Confirm the original camera part number and physical connector layout before purchase.
Do I need to recalibrate the cameras after replacement?
Camera replacement or movement can require the camera calibration process to be cleared and completed again. Follow the applicable Tesla service procedure for your vehicle before relying on driver-assistance features.
Should I install the side repeater camera myself?
Owners experienced with Tesla exterior trim and service procedures may be comfortable with the replacement. If you are unsure about access, connectors, mounting tabs or calibration, use qualified installation assistance.
What should I check before installing the new cameras?
Compare the new and original assemblies side by side. Confirm the left and right positions, part markings, connectors, mounting tabs and exterior finish before connecting or installing them.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
