Model-Specific Shape
Contoured for the outer rear lamp position of 2017–2020 Model 3 vehicles.











Eligible products only. Cannot be combined with other offers.
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택











Replace a damaged or worn outer rear lamp with a vehicle-specific assembly designed for the 2017–2020 Tesla Model 3.
This assembly replaces the outer lamp mounted to the rear quarter panel. It is not the smaller inner lamp mounted on the trunk lid.
Contoured for the outer rear lamp position of 2017–2020 Model 3 vehicles.
Integrated LED lighting restores the lamp’s functional rear-lighting presence.
A formed ABS rear housing supports the lens, connector and mounting points.
Designed around the vehicle’s original connector and mounting location.
Tesla components can vary by production configuration. Compare the side, lens shape, connector and part number with the lamp currently installed on your vehicle.
Left and right are determined while sitting inside the vehicle and facing forward. Avoid using “driver side” or “passenger side,” as these positions differ between left-hand-drive and right-hand-drive markets.
For the left rear quarter-panel position when facing forward in the vehicle.
Part No. 1077397-00-G
For the right rear quarter-panel position when facing forward in the vehicle.
Part No. 1077398-00-GThe rear housing incorporates the electrical connector, mounting geometry and sealed lens seam needed for installation in the factory outer-lamp location.
Inspect the connector, gasket area and mounting tabs before installation. A damaged seal or uneven fit can allow condensation or water intrusion.
A cracked, faded or non-functioning outer lamp disrupts both rear visibility and the Model 3’s continuous visual line. This replacement-style assembly restores the defined red lens profile of the original location.
After installation, test every supported lighting function before driving. Confirm even seating, correct illumination and secure mounting with the trunk open and closed.
Exterior lighting is safety-related. Professional installation is recommended if you are unfamiliar with vehicle trim, electrical connectors or lamp alignment.
Compare the new lamp’s side, connector, mounting tabs and part number with the removed unit.
Power off the vehicle and access the outer rear lamp using the appropriate service procedure.
Attach the electrical connector and seat the lamp evenly without pinching or displacing the seal.
Confirm secure mounting and test all rear-lighting functions before returning the vehicle to road use.
No. The left and right assemblies are separate variants, and one selected outer taillight assembly is supplied per order.
Sit inside the vehicle and face forward. The lamp on your left is the vehicle-left assembly; the lamp on your right is the vehicle-right assembly. This convention works for both left-hand-drive and right-hand-drive vehicles.
No. This is the outer lamp mounted to the rear quarter panel. Compare its shape and mounting location with your existing lamp before ordering.
It is listed specifically for the 2017–2020 Model 3 and should not be assumed to fit the updated 2021-and-later lamp configuration.
The listed vehicle-left part number is 1077397-00-G, while the listed vehicle-right part number is 1077398-00-G. Confirm the label and connector on your existing lamp because production configurations can vary.
Yes, especially if you are not experienced with exterior lighting or vehicle trim removal. The lamp must be seated and sealed correctly, and every lighting function should be tested before driving.
Use mild automotive soap, clean water and a soft microfiber cloth. Avoid abrasive pads, harsh solvents and concentrated high-pressure water around the housing seam.
No specific DOT, E-mark or regional certification is stated on this listing. Check local vehicle inspection and road-use requirements before installation.
Confirm your model year, mounting position, vehicle side and part number before completing your purchase.
Back to Purchase OptionsTesla and Model 3 are trademarks of Tesla, Inc. Tesstudio is not affiliated with, endorsed by or sponsored by Tesla, Inc. Product compatibility references are used solely to identify the intended vehicle application.
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.