Tesla Model Y Juniper (2025.03+) Full-Cover TPE Trunk Tailgate Protector
15%OFF
US$59+18%OFF
US$159+20%OFF
US$299+
안녕하세요,
2 영업일 이내에 답변을 받지 못하셨다면, 지연에 대해 진심으로 사과드립니다.
더 빠른 답변을 원하시면 WhatsApp (+1 (626) 412-7352 , +86 191 2063 1131 또는 +86 190 2201 1181) 으로 문의해 주세요. 위 번호로 직접 문자 메시지를 보내주셔도 됩니다.
귀하의 인내와 이해에 감사드립니다!
귀찮으시다면, "Tesstudio 공식 설치 서비스"를 위해 남부 캘리포니아 공식 매장을 방문하세요. 저희 전문가가 귀하의 Tesla 액세서리를 완벽하게 설치해 드립니다.
주소:
14761 Franklin Ave unit G, Tustin, CA 92780, 미국
친절히 알려드립니다: 저희는 제품 판매를 전문으로 하며, 전문가에게 설치를 의뢰하실 것을 권장합니다. 부적절한 설치로 인해 발생한 문제는 애프터서비스에 포함되지 않습니다. 양해해 주셔서 감사합니다.
1년 보증을 제공합니다. (인적 손상이 아닌 제품 문제에 대해서는 1년간 애프터 서비스를 제공합니다.)
모든 주문은 FedEx, USPS, UPS, SF Express 등 신뢰할 수 있는 운송업체를 통해 배송됩니다.
모든 주문에 무료 배송 혜택을 누리세요! 재고가 있는 상품은 1~2 영업일 이내에 처리 및 발송되며, 미국 국내 배송은 일반적으로 2~9 영업일이 소요됩니다.
사전 주문 상품이나 일시적으로 품절된 상품의 경우, 배송은 상품 페이지에 제공된 기간에 따라 진행됩니다.
옵션 선택
Protect the Tailgate Surface That Cargo Reaches First
A model-specific molded TPE inner liner for the Tesla Model Y Juniper tailgate. Add an easy-clean protective surface over the original felt area where luggage, boxes, pets and everyday cargo can make contact.
Protect the Felt Before Repeated Loading Leaves Its Mark
Luggage, Boxes and Pet Gear Contact the Same Area Again and Again
The inner tailgate surface sits directly beside the cargo opening. Hard-edged luggage, storage bins, dirty equipment and pet gear can repeatedly rub against the original felt during daily use.
Add a Replaceable Barrier Over the High-Contact Surface
The molded liner places a wipe-clean TPE surface between everyday cargo and the covered original tailgate trim.
Built for a Cargo Area That Actually Gets Used
Tailgate Coverage
Covers the large original felt area on the inside of the Model Y Juniper rear hatch.
Light Scuff Protection
Helps reduce direct routine contact between luggage, boxes, pet gear and the covered factory surface.
Easy-Clean Surface
Routine dirt and marks are easier to wipe from the TPE liner than from the original felt underneath.
Integrated Fit
Molded specifically around the Model Y Juniper tailgate instead of relying on a universal flat protective sheet.
Groceries Today. Luggage Tomorrow. Outdoor Gear on the Weekend.
The protector becomes most useful when the cargo area regularly carries items that move, rub or bring dirt into the vehicle.
A Practical Surface for One of the Most Exposed Cargo Areas
The liner follows the corresponding Model Y Juniper tailgate profile instead of using a generic rectangular panel.
Raised molded lines add structure while giving the protector a clean automotive-style appearance.
The dark surface coordinates naturally with the surrounding rear cargo-area trim.
Secure the Protector to the Original Felt Surface
The current design uses multiple hook-and-loop contact points on the rear of the molded liner to hold it against the compatible factory felt surface.
- No drilling shown in the current installation design
- Multiple attachment points across the rear surface
- Removable for cleaning or inspection
- Model-shaped panel helps maintain alignment
Protection Without Covering the Features You Still Need
Model-specific openings are positioned around the corresponding tailgate features shown for the Model Y Juniper.
Cutouts are molded around the corresponding factory locations instead of simply covering the entire panel.
After installation, check that buttons, handles, latches and moving components remain fully accessible.
A Juniper-specific outline helps the protector follow the perimeter of the original tailgate trim.
Wipe the Protector Instead of Repeatedly Cleaning Factory Felt
The exposed TPE surface makes routine cargo-area care more straightforward when dust, pet hair or light dirt reaches the inside of the tailgate.
- Remove loose debris first
- Wipe routine marks with a soft damp cloth
- Allow the surface to dry before loading cargo
- Periodically inspect the felt underneath
Designed for Model Y Juniper — Not Earlier Model Y Tailgates
Tailgate shape and trim geometry changed with the refreshed Model Y. Confirm the exact vehicle configuration before installation.
Tesla Model Y Juniper
Model Y Juniper 2025.03+
Interior surface of the rear tailgate / hatch
Clean. Test-Fit. Align. Press Into Position.
Confirm the Juniper fitment before pressing the hook-and-loop backing against the original felt surface.
Clean the Felt
Remove pet hair, dust and loose debris from the original tailgate surface.
Test-Fit
Hold the protector in place and check the outer contour and factory openings.
Align
Match the molded cutouts and perimeter before pressing the attachment points into the felt.
Function Check
Open and close the hatch and confirm all required buttons, handles and moving parts work normally.
One Molded Panel for the Main Felt-Covered Hatch Surface
This listing is focused on protecting the interior tailgate panel shown in the product images. It is not a replacement for a separate trunk-floor cargo mat.
- Tailgate inner-panel protection
- Juniper-specific molded shape
- Factory-feature cutouts
- Grooved matte-black TPE surface
Keep Dirt on the Replaceable Surface, Not Trapped Underneath
Wipe dust, light dirt and common cargo marks from the TPE surface as needed.
Periodically confirm that the protector remains properly aligned around the tailgate perimeter.
Lift the protector occasionally and remove grit trapped between the TPE and original felt surface.
Build a More Protected Model Y Juniper Cargo Area
Three related Juniper products for cargo organization, pet travel and broader all-weather protection.
Model Y Juniper Tailgate Protector Questions
Which Tesla does this tailgate protector fit?
This listing is intended for Tesla Model Y Juniper. The current product option is Model Y Juniper 2025.03+. Confirm your vehicle before ordering.
Does it fit the older Model Y?
Do not assume compatibility with earlier Model Y versions. This protector is shaped around the refreshed Model Y Juniper tailgate configuration shown in the product images.
What part of the vehicle does it protect?
It covers the main felt-covered interior panel on the rear hatch / tailgate shown in the product images.
Is this the same as a trunk floor mat?
No. This product is designed primarily as an inner tailgate-panel protector. A separate trunk-floor mat may be needed if you want floor coverage as well.
What material is the protector made from?
The protector uses molded TPE with a textured, grooved matte-black surface.
Does it help protect against scratches and scuffs?
It adds a physical barrier over the covered original felt surface, helping reduce direct everyday contact from luggage, boxes, pet gear and other cargo.
How does the protector attach?
The current design uses multiple hook-and-loop attachment points that engage with the compatible original felt surface.
Does installation require drilling?
The current installation design shown in the product media uses hook-and-loop attachment rather than drilling.
Will it block the factory tailgate button or openings?
The protector includes corresponding openings for the factory locations shown in the product media. After installation, always confirm every required control, latch and moving component remains fully accessible.
Is it useful for owners who travel with dogs?
Yes. The liner can help reduce direct paw, dirt and pet-equipment contact with the covered tailgate felt. It is not a pet restraint or cargo barrier.
How should I clean the TPE surface?
Remove loose dirt first, then wipe routine marks with a soft damp cloth. Allow the surface to dry before loading cargo against it.
Can I remove the protector later?
The hook-and-loop design allows the protector to be removed for cleaning, inspection or access to the original felt surface.
What should I do if the openings do not line up?
Do not stretch or force the liner into position. Remove it, recheck your vehicle fitment and compare the tailgate geometry with the product images.
Are the boxes, pets or cargo shown in the images included?
No. Vehicles, storage boxes, pets and lifestyle cargo shown in product imagery are for demonstration only. This listing is for the selected tailgate protector.
질문과 답변
이메일, 실시간 채팅, 그리고 자세한 설치 가이드를 통해 도움을 드립니다. 또한, 인플루언서들이 직접 출연하는 단계별 튜토리얼 영상을 제공하여 설치 과정을 도와드립니다.
당사는 1년 보증을 제공합니다(일부 제품은 2년).
네, 설치 후 제품을 제거해도 차량의 원래 배선 하네스에 영향을 미치지 않습니다.
고객이 제품을 받은 후 품질에 문제가 있는 경우 무료로 반품 및 교환해 드립니다.
Subscribe
Join Us - Enjoy our latest news and exclusive discounts & gifts.
