Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+

Keep Leaves and Debris Out of the Front Air Intake

A custom-fit protection mesh for Model Y Juniper that adds a finer barrier over the factory front air inlet to help stop leaves, insects and road debris without sealing off airflow.

Factory Airflow Openings Can Also Let Debris Through

The original intake needs airflow, but its larger openings can also allow leaves, insects and other loose debris to reach the area underneath.

Add a Finer First Line of Defense

The additional mesh layer is designed to catch larger foreign objects before they pass deeper into the front air-intake area.

That can make routine inspection and cleaning easier while preserving the open structure required for normal airflow.

• Helps block fallen leaves
• Helps intercept insects and larger debris
• Reduces direct entry into the intake opening
• Keeps the visible intake area cleaner

Protection Without Turning the Intake Into a Solid Cover

The mesh is designed around airflow rather than simply covering the opening with a closed panel.

Dense Enough to Screen Debris. Open Enough for Airflow.

The fine inner mesh sits behind the larger structural grille, creating an additional debris barrier while maintaining an open airflow path.

• Fine internal mesh layer
• Open structural grille design
• Designed around original intake airflow
• No foam filter element to replace

3D Molded to Follow the Model Y Juniper Intake

A protection part works better when it follows the original opening rather than relying on universal mesh that has to be cut, bent or taped into place.

Designed to Look Like It Belongs There

The molded frame follows the surrounding Juniper intake shape and sits close to the original vehicle trim.

• 3D molded vehicle-specific shape
• Black finish blends with factory plastics
• Left and right pieces follow intake contours
• No trimming required during normal installation

ABS Frame With a Dense Integrated Mesh

The outer structure provides shape and support while the finer mesh performs the debris-screening work.

Structured Protection, Not Loose Universal Mesh

The molded ABS structure helps the guard maintain its shape across the long intake opening while supporting the internal mesh.

• Molded ABS support structure
• Dense uniform inner mesh
• Black OEM-style appearance
• Designed for repeated cleaning and reuse

Clip It In. No Adhesive Required.

The integrated clips secure the mesh to the matching intake structure without adding tape, glue or permanent modification.

Designed for Straightforward DIY Installation

Align each side with the corresponding intake opening and engage the molded clips until the guard sits evenly in position.

• No drilling
• No wiring
• No adhesive tape
• No permanent modification
• Removable for cleaning

Integrated Clips Instead of Loose Tape

The retention points are molded into the guard itself for a cleaner installation and easier removal later.

A More Finished Look With Added Debris Protection

The mesh fills the large visible intake openings with a finer pattern while staying visually consistent with the black factory trim.

Low-Profile Once Installed

The black mesh follows the full intake line and visually integrates with the surrounding frunk and windshield-cowl plastics.

Style A or Style B — Both Are 2-Piece Sets

The current product selector offers two mesh-frame designs. Check the product image and selected option before checkout.

STYLE A · 2 PCS Style A

Cleaner horizontal opening pattern with a lighter frame structure. Current package size is approximately 55 × 13 × 3.8 cm.

STYLE B · 2 PCS Style B

Denser visible grille pattern with additional structural ribs. Current package size is approximately 53 × 14 × 3.3 cm.

Install in Four Simple Steps

No special wiring or permanent modification is required.

Product Details

Frequently Asked Questions

Add More Protection to Your Model Y Juniper

Pair the front air intake mesh with other protection upgrades designed around dirt, insects, road debris and daily driving.