• Rivian
ログイン

言語

カート

カートが空です
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp

Starlink Mini Heavy-Duty Suction Cup Mount with Clamp

セール価格$79.00 USD

Save more on your order

13% off US$59+
16% off US$159+
18% off US$299+

Applied at checkout · No code needed

Color:Black
Suction Cup Type:
87people are viewing this right now.
Guaranteed safe checkout
  • PayPal
  • Visa
  • Mastercard
  • Maestro
  • JCB
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Afterpay
Loved
by 100,000+ Tesla
Owners
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp
Starlink Mini Heavy-Duty Suction Cup Mount with Clamp セール価格$79.00 USD
TESSTUDIO · STARLINK MINI MOUNTING

Heavy-Duty Mounting Without Drilling Permanent Holes

Secure Starlink Mini to compatible smooth surfaces or round rails with a modular suction-cup base, adjustable clamp mount and multi-angle positioning system.

Tesstudio heavy duty suction cup mount with clamp for Starlink Mini
2-Cup / 3-Cup Choose your suction base
360° Rotation Horizontal positioning
90° Tilt Vertical angle adjustment
Black · Silver · Red Multiple base options
ONE MOUNT · MORE PLACEMENT OPTIONS

Move Starlink Mini Instead of Committing to One Permanent Location

Use suction mounting on compatible smooth surfaces or switch to the clamp when a rail or round tube gives you a better installation point.

01
Suction-Mount It

Create a temporary mounting point on clean, flat and non-porous compatible surfaces.

02
Clamp It to a Rail

Attach the adjustable clamp to compatible round tubing, railings and similar support structures.

03
Adjust the Angle

Reposition Starlink Mini without removing and reinstalling the entire mounting base.

Find the Angle That Works for Your Setup

The articulated support gives you substantially more positioning freedom than a fixed-angle suction mount.

360° Horizontal + 90° Vertical Adjustment

Rotate the upper mount through 360 degrees horizontally and adjust the vertical position through up to 90 degrees.

This helps when the available mounting surface is not located at the exact angle you want for Starlink Mini.

  • 360° horizontal rotation
  • Up to 90° vertical adjustment
  • Locking adjustment knob
  • Quick repositioning without removing the base
360 degree horizontal and 90 degree vertical Starlink Mini mount adjustment

From Starlink Mini Mount to Adjustable Rail Clamp

The included clamp expands the installation options beyond flat suction-compatible surfaces.

Adjustable clamp mount dimensions and 1/4-20 accessory connection

Adjustable 16–49.8 mm Clamp Range

The clamp is designed to grip a range of compatible round tubes and rails, making it useful around boats, RV equipment, railings and outdoor structures.

  • Approx. 16–49.8 mm / 0.63–1.96 in clamp range
  • 1/4"-20 accessory interface
  • Adjustable locking clamp
  • Suitable for multiple round-rail diameters

Built Around the Parts That Take the Load

The suction system combines thick rubber sealing surfaces, alloy handles and reinforced locking hardware.

Heavy-Duty Suction Hardware

Each suction point uses a thick rubber contact pad with a mechanical locking lever to create and maintain suction against a suitable clean surface.

  • Thickened rubber suction pad
  • Non-slip alloy handle structure
  • Reinforced locking buckle
  • Reusable mechanical suction design
Heavy duty rubber suction pad alloy handle and reinforced locking buckle

Designed for Real Outdoor Starlink Setups

Built for RV, vehicle and outdoor environments where changing weather is part of normal use.

Starlink Mini heavy duty suction cup mount used outdoors in rain
Important: Suction holding force depends heavily on surface material, cleanliness, temperature, installation quality and dynamic load. Inspect every suction cup before use and recheck it regularly. For exterior use on a moving vehicle, use an appropriate secondary safety retention method.
CHOOSE THE BASE

2-Cup or 3-Cup — Choose the Structure for Your Setup

Both versions are designed around Starlink Mini. The three-cup version adds another suction point and a wider triangular footprint.

2-cup and 3-cup Starlink Mini suction mount sizes and compatibility

Compare Suction Cup Options

Cup diameter and listed static suction ratings vary by color and suction-cup configuration.

Color Base Cup Size Horizontal Vertical
Black 2-Cup 123 mm 115 kg 100 kg
Black 3-Cup 123 mm 190 kg 117 kg
Silver 2-Cup 110 mm 90 kg 70 kg
Silver 3-Cup 110 mm 110 kg 90 kg
Red 2-Cup 150 mm 150 kg 130 kg
Red 3-Cup 150 mm 250 kg 230 kg
About the ratings: The values above are the listed static suction-force ratings for the corresponding variants. They are not vehicle payload ratings and should not be interpreted as guaranteed holding force in vibration, wind, rain, dirt or high-speed driving conditions.

Three Colors. Two Suction-Cup Configurations.

Choose Black, Silver or Red and pair it with either a dual or triple suction-cup base.

Black silver and red dual and triple suction cup mounts for Starlink Mini

One Mount for More Than One Kind of Trip

Use the suction base or clamp system to adapt Starlink Mini to different temporary mounting environments.

Starlink Mini suction cup mount used on RV boat roof and outdoor surfaces
RV / Caravan Temporary exterior mounting
Boat / Rail Use the adjustable clamp
Vehicle Compatible smooth surfaces
Outdoor Structures Flat surfaces or round rails

Clean the Surface. Lock the Cups. Mount Starlink Mini.

Correct surface preparation is one of the most important parts of suction-cup performance.

Starlink Mini heavy duty suction cup mount installation instructions
STEP 01
Clean the Surface

Remove dust, grease and moisture from the mounting area.

STEP 02
Press Out the Air

Press each suction cup firmly against a smooth surface.

STEP 03
Lock Every Lever

Fully engage each suction-cup locking buckle.

STEP 04
Attach the Bracket

Secure the adjustable upper support to the suction base.

STEP 05
Mount Starlink Mini

Attach Starlink Mini and tighten the locking hardware.

STEP 06
Check Before Use

Test every suction point before leaving the mount unattended.

COMPATIBILITY CHECK

Check Your Mounting Surface Before Ordering

Suction cups perform best on smooth, flat, clean and non-porous surfaces.

Designed For Starlink Mini
Base Options 2-Cup or 3-Cup
Color Options Black, Silver, Red
Horizontal Adjustment 360°
Vertical Adjustment Up to 90°
Clamp Range Approx. 16–49.8 mm / 0.63–1.96 in
Accessory Interface 1/4"-20
Best Suction Surfaces Smooth glass, smooth painted panels and other clean, flat non-porous compatible surfaces
Avoid Rough walls, textured paint, dirty surfaces, uneven seams, porous materials and damaged mounting areas
Other Starlink Models Current compatibility artwork identifies Starlink Mini; compatibility with Standard, Gen 3 or High Performance should not be assumed
Starlink Mini Included No

Frequently Asked Questions

Is this suction mount designed for Starlink Mini?
Yes. The current compatibility design is intended for Starlink Mini. Other Starlink models use different dimensions and mounting systems, so compatibility should not be assumed.
What is the difference between the 2-Cup and 3-Cup versions?
The 2-Cup version uses two suction points and has a more compact footprint. The 3-Cup version adds a third suction point and creates a wider triangular base. Listed suction-force ratings also vary by version and color.
Which colors are available?
The current product selector offers Black, Silver and Red suction-cup base options.
Can I adjust the Starlink Mini angle?
Yes. The support provides 360° horizontal rotation and up to 90° vertical adjustment so the mounted equipment can be repositioned without moving the entire suction base.
What surfaces work best with the suction cups?
Use a clean, smooth, flat and non-porous surface. Glass and suitable smooth painted panels generally provide a much better seal than textured, dirty, porous or uneven materials.
Can the mount attach to a round rail or tube?
Yes. The included adjustable clamp is designed for compatible round tubing approximately 16–49.8 mm (0.63–1.96 inches) in diameter.
Does the mount support 1/4"-20 accessories?
Yes. The current clamp-and-arm design includes a standard 1/4"-20 interface that can also support compatible cameras, lights and other accessories when used within appropriate loads.
Can I install it on an RV?
Yes, provided the selected RV surface is smooth, clean, non-porous and suitable for suction mounting. Do not place the cups across seams, trim, grooves or curved edges.
Can I use it in the rain?
The mount is designed for outdoor use, but suction performance can change with water, dirt, temperature and surface conditions. Inspect and retest the mount regularly.
Can it stay mounted while driving?
Exterior vehicle use introduces vibration, wind load and changing road conditions that are very different from static suction tests. Check local requirements and use a suitable secondary safety retention system whenever the installation could create a road hazard.
How should I prepare the mounting surface?
Clean the area thoroughly and remove dust, grease and moisture. Press every cup firmly against the surface to remove air, then fully close every locking lever before installing Starlink Mini.
Can the suction cups be reused?
Yes. Release the locking levers carefully, remove the mount and keep the rubber suction surfaces clean and free of damage before the next installation.
Is Starlink Mini included?
No. Starlink Mini and other equipment shown in lifestyle images are for demonstration and are not included unless specifically stated in the selected product option.

Build a More Flexible Starlink Mini Setup

Add a second mounting option or portable power for travel, camping and vehicle use.

FREESTANDING MOUNT Starlink Mini Adjustable Tripod Stand Add a portable ground-standing option for campsites, RV stops and remote work. GLASS MOUNTING Starlink Mini Window & Sunroof Suction Mount Create a removable mounting solution for compatible smooth glass surfaces. PORTABLE POWER Starlink Mini 99Wh Portable Power Bank Add portable stored power for camping, travel and remote-work connectivity.
Shop All Starlink Accessories
Starlink is referenced solely for product compatibility identification. Tesstudio is an independent accessories provider and is not affiliated with or endorsed by Starlink or SpaceX. Listed suction ratings are variant-specific static values. Actual holding performance depends on surface condition, temperature, installation, vibration, wind and load.

Q&A