• Rivian
ログイン

言語

カート

カートが空です
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+

Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+

セール価格$49.00 USD 通常価格$89.00 USD

Save more on your order

13% off US$59+
16% off US$159+
18% off US$299+

Applied at checkout · No code needed

Model:
Options:Style A (2-Piece Set)
28people are viewing this right now.
Guaranteed safe checkout
  • PayPal
  • Visa
  • Mastercard
  • Maestro
  • JCB
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Afterpay
Loved
by 100,000+ Tesla
Owners
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+
Front Air Intake Protection Mesh for Tesla Model Y Juniper 2025.03+ セール価格$49.00 USD 通常価格$89.00 USD
TESSTUDIO · MODEL Y JUNIPER PROTECTION

Keep Leaves and Debris Out of the Front Air Intake

A custom-fit protection mesh for Model Y Juniper that adds a finer barrier over the factory front air inlet to help stop leaves, insects and road debris without sealing off airflow.

Tesstudio front air intake protection mesh for Tesla Model Y Juniper
Custom Fit Designed for Model Y Juniper
Dense Mesh Helps intercept larger debris
Clip-On Install No adhesive required
2-Piece Set Left and right intake coverage
PROTECT THE OPEN INTAKE

Factory Airflow Openings Can Also Let Debris Through

The original intake needs airflow, but its larger openings can also allow leaves, insects and other loose debris to reach the area underneath.

Add a Finer First Line of Defense

The additional mesh layer is designed to catch larger foreign objects before they pass deeper into the front air-intake area.

That can make routine inspection and cleaning easier while preserving the open structure required for normal airflow.

  • Helps block fallen leaves
  • Helps intercept insects and larger debris
  • Reduces direct entry into the intake opening
  • Keeps the visible intake area cleaner
Model Y Juniper air intake protection mesh blocking leaves and foreign objects

Protection Without Turning the Intake Into a Solid Cover

The mesh is designed around airflow rather than simply covering the opening with a closed panel.

Air inlet anti dirt mesh for Model Y Juniper designed to preserve airflow

Dense Enough to Screen Debris. Open Enough for Airflow.

The fine inner mesh sits behind the larger structural grille, creating an additional debris barrier while maintaining an open airflow path.

  • Fine internal mesh layer
  • Open structural grille design
  • Designed around original intake airflow
  • No foam filter element to replace
MODEL-SPECIFIC GEOMETRY

3D Molded to Follow the Model Y Juniper Intake

A protection part works better when it follows the original opening rather than relying on universal mesh that has to be cut, bent or taped into place.

Designed to Look Like It Belongs There

The molded frame follows the surrounding Juniper intake shape and sits close to the original vehicle trim.

  • 3D molded vehicle-specific shape
  • Black finish blends with factory plastics
  • Left and right pieces follow intake contours
  • No trimming required during normal installation
3D molded snug fit air intake protection mesh for Tesla Model Y Juniper

ABS Frame With a Dense Integrated Mesh

The outer structure provides shape and support while the finer mesh performs the debris-screening work.

ABS frame and dense mesh structure of Model Y Juniper air intake protection screen

Structured Protection, Not Loose Universal Mesh

The molded ABS structure helps the guard maintain its shape across the long intake opening while supporting the internal mesh.

  • Molded ABS support structure
  • Dense uniform inner mesh
  • Black OEM-style appearance
  • Designed for repeated cleaning and reuse
NON-DESTRUCTIVE INSTALLATION

Clip It In. No Adhesive Required.

The integrated clips secure the mesh to the matching intake structure without adding tape, glue or permanent modification.

Designed for Straightforward DIY Installation

Align each side with the corresponding intake opening and engage the molded clips until the guard sits evenly in position.

  • No drilling
  • No wiring
  • No adhesive tape
  • No permanent modification
  • Removable for cleaning
Clip on installation for Tesla Model Y Juniper front air intake protection mesh

Integrated Clips Instead of Loose Tape

The retention points are molded into the guard itself for a cleaner installation and easier removal later.

Integrated clip design on Model Y Juniper front air inlet mesh
FACTORY OPENING → FINER PROTECTION

A More Finished Look With Added Debris Protection

The mesh fills the large visible intake openings with a finer pattern while staying visually consistent with the black factory trim.

Before and after Tesla Model Y Juniper air intake mesh installation

Low-Profile Once Installed

The black mesh follows the full intake line and visually integrates with the surrounding frunk and windshield-cowl plastics.

Installed front air intake protection mesh on Tesla Model Y Juniper
CHOOSE THE DESIGN

Style A or Style B — Both Are 2-Piece Sets

The current product selector offers two mesh-frame designs. Check the product image and selected option before checkout.

Style A Model Y Juniper front air intake mesh two piece set
STYLE A · 2 PCS Style A

Cleaner horizontal opening pattern with a lighter frame structure. Current package size is approximately 55 × 13 × 3.8 cm.

Style B Model Y Juniper front air intake mesh two piece set
STYLE B · 2 PCS Style B

Denser visible grille pattern with additional structural ribs. Current package size is approximately 53 × 14 × 3.3 cm.

Before checkout: Both options are designed for Model Y Juniper 2025.03+, but Style A and Style B use different visible frame designs. Confirm the selected style in the variant selector.

Install in Four Simple Steps

No special wiring or permanent modification is required.

STEP 01
Open the Frunk

Make sure the vehicle is parked safely and the front trunk is open.

STEP 02
Clean the Intake

Remove leaves, dust and existing debris from the factory opening.

STEP 03
Align Each Side

Match the left and right mesh pieces with the corresponding intake areas.

STEP 04
Press the Clips In

Engage the clips fully and check that both pieces sit flat and secure.

Product Details

Brand Tesstudio
Compatibility Tesla Model Y Juniper 2025.03+
Product Type Front air intake protection / anti-debris mesh
Material Molded ABS frame with integrated dense mesh
Installation Direct clip-on, no adhesive required
Style Options Style A / Style B
Quantity 2-piece set
Style A Package Approx. 55 × 13 × 3.8 cm · approx. 0.3 kg
Style B Package Approx. 53 × 14 × 3.3 cm · approx. 0.293 kg
Main Function Helps intercept leaves, insects and larger debris before they enter the exposed front air intake
Vehicle Included No

Frequently Asked Questions

Which Tesla does this front air intake mesh fit?
The current product is designed for Tesla Model Y Juniper 2025.03+. It should not be assumed to fit earlier Model Y versions or other Tesla models.
What does the protection mesh do?
It places a finer barrier over the factory front air inlet to help intercept leaves, insects and other larger debris before they pass deeper into the intake area.
Does the mesh block airflow?
The product uses an open grille structure with a fine mesh layer and is designed to maintain an airflow path through the original intake opening. The mesh should still be cleaned periodically if debris accumulates.
What is the difference between Style A and Style B?
Both are two-piece Model Y Juniper intake-mesh sets, but they use different visible frame and grille patterns. Review the variant images and select your preferred design before checkout.
Does installation require adhesive?
No. The current design uses integrated clips rather than adhesive tape for normal installation.
Does installation require drilling?
No drilling, wiring or permanent modification is required. The two pieces clip into their corresponding intake positions.
Can the mesh be removed later?
Yes. The clip-on design allows the guards to be removed for cleaning, inspection or returning the vehicle to its original configuration.
What material is the frame made from?
The current product information identifies the molded frame as ABS material with a dense mesh incorporated into the open sections.
Will it stop all dust?
No. This is an anti-debris protection mesh rather than a sealed cabin filter. Very fine dust can still pass through. Its primary role is to intercept larger debris such as leaves, insects and similar foreign objects.
Do I still need to clean the air intake?
Yes. The mesh makes larger debris easier to catch, but accumulated leaves, insects and dirt should still be removed periodically so airflow remains unobstructed.
Does the set include both the left and right pieces?
Yes. Both Style A and Style B are currently listed as two-piece sets covering the left and right sides of the intake.
Will this fit the older Model Y 2020–2025?
This listing is specifically for Model Y Juniper 2025.03+. Earlier Model Y vehicles use different front-area geometry, so compatibility should not be assumed.
Is this an official Tesla accessory?
No. This is a Tesstudio third-party accessory designed for compatible Tesla Model Y Juniper vehicles.

Add More Protection to Your Model Y Juniper

Pair the front air intake mesh with other protection upgrades designed around dirt, insects, road debris and daily driving.

FRUNK PROTECTION Cabin Air Intake & Drainage Guard Help keep leaves and debris away from exposed frunk-side drainage and intake areas. FRONT BUMPER PROTECTION ABS Front Grille Mesh Insert for Model Y Juniper Add another debris and insect barrier lower on the vehicle's front-end airflow area. ROAD DEBRIS PROTECTION All-Weather Mud Guards for Model Y Juniper Help reduce mud, water and road debris thrown toward the lower body while driving.
Tesla and related model names are referenced solely for compatibility identification. Tesstudio is an independent accessories provider and is not affiliated with or endorsed by Tesla, Inc. Confirm that your vehicle is a Model Y Juniper 2025.03+ before ordering.

Q&A